<img height="1" width="1" src="https://www.facebook.com/tr?id=163851757554412&amp;ev=PageView &amp;noscript=1">

Why China Really Needs Lean Manufacturing Firms

September 17, 2020

 by Renaud Anjoran

factory worker fixing equipment

As Chinese manufacturers look for new ways to improve their operations in the face of growing competition and global uncertainty, many are starting to show an interest in the Lean approach. 

This trend has not gone unnoticed. In the past few years, many lean-manufacturing consulting firms from the West have been positioning themselves as leaders on the topic—in the hopes of getting Chinese manufacturers to look at their services. Despite how lucrative the opportunity may seem, however, many are unaware of the cultural obstacles that need to be overcome.

In this blog, we will take a close look into the current state of China's manufacturing sector and why lean manufacturing is necessary for the continued growth and survival of its many factories.

Why Lean Manufacturing is Urgently Needed in China

Chinese manufacturers can be formidable competitors. They make the world’s cheapest phones and, at the same time, the most advanced smartphones. They have a seemingly unlimited labor supply and benefit from excellent logistical infrastructures.

Yet, it is becoming harder for them to make a profit. Half of them might collapse in the next 5 years if things do not change. They are at a turning point (similar to Japan in the 1980s and South Korea in the 1990s) where most poorly-managed operations are likely to go bankrupt.

Three trends are responsible for this fall in profitability:

  1. China’s demographic policy and the development of inner provinces are progressively reducing the pool of migrant workers who are willing to work in exporting factories. As a consequence, salaries have gone up by nearly 20 percent a year, and some areas suffer serious labor shortages.
  2. Many importers are working on implementing a “China Plus One” strategy, and are slowly developing alternative sources in other countries. Multinationals often pave the way, with examples like Samsung in Vietnam or Chinese phone maker Oppo in Indonesia. Once component suppliers also set up production facilities in these countries, conditions are met for other companies to also purchase products there.
  3. Systemic overcapacity in nearly all sectors – from aluminum foundries to fabric mills, and from cars to furniture – drives fierce competition on price. A 3% price move can be the difference between life and death for many factories.

As the graph below shows, neighboring countries Vietnam and Cambodia are much cheaper than China, and the gap is widening. China’s minimum wage has been on par with that of Indonesia, the Philippines, and Thailand since 2015:

average monthly minimum wage in asia

This trend is also playing out on a global scale, given the ongoing trade and political disputes with the United States as well as concerns about COVID-19's effect on the global supply chain. Many companies that sell products in the US understandably feel that moving operations within the US or neighboring Mexico is the best way to save costs and limit risks.

In other words, China is becoming an expensive and uncertain place to manufacture. Unfortunately, to add to this, labor productivity has risen more slowly than wages, so competitiveness has gone down. On average, it still takes four Chinese workers to produce as much as one American worker.

On a macro scale, Accenture warns that China’s growth has been built on the twin pillars of millions of new workers and heavy capital investment, and that neither will be enough to maintain high growth.

How the Chinese Manufacturing Sector will Reconfigure Itself

chinese production relocating to south east asia

As I wrote above, many poorly performing factories will disappear. This will take several forms.

1. Production relocating to lower-wage countries

For example, apparel and shoe factories left Japan in the 1960s, Taiwan and Korea in the 1970s and 1980s, and are leaving China at the moment – only much more slowly.

2. Most industries will consolidate

In some cases, a large group will acquire competitors and reorganize them to be more efficient. This will certainly be true in the automotive sector. McKinsey estimates that consolidation of this industry could boost productivity by up to 50 percent. Another driver of consolidation is bankruptcies. In many cases, the owner suddenly disappears and leaves suppliers and employees at a loss. This phenomenon will probably become more frequent.

3. Chinese factories automating their processes

China has been the largest market in the world for industrial robots since 2014, and Beijing’s 12th Five-Year Plan and “China 2025” Initiative (which is now less visible but is still in place for the most part) are encouraging the growth of domestic robot manufacturers. Manufacturers are increasingly becoming more aware of automation's potential for increasing factory productivity.

However, as we discussed in a previous manufacturing automation article, many factories simply focus on purchasing the equipment but spend very little on ensuring that it is used effectively. Many of them frequently experience machine breakdowns and find that many of their product quality issues don’t disappear.

As David Collins, CEO of China Manufacturing Consultants, says, “factories in China have no culture of maintenance and it hampers their automation efforts”. Some are actually failing, just like General Motors’ "Lights out" factories did in the 1980s.

4. More and more manufacturers starting a continuous improvement journey based on Lean Manufacturing

Many of these companies are the leaders of tomorrow. They hear about Lean from their customers, from high-profile cases (e.g. GE relocated a lot of production in their Appliance Park in the USA and generated cost savings by using Lean tools), from trade publications, and/or from their local competitors.

Cultural Obstacles To Lean Manufacturing in China

chinese cultural barriers

KPMG predicts that a fully implemented Lean approach in China could attain the level of productivity as that of the best American and European factories. Yet, it has proven “difficult to implement in China to date, owing to cultural barriers”. I listed some of these obstacles below, from our experiences.

  • Many Chinese factory owners have not seen operations in the West or in Japan and don’t understand the need to improve the way they work.
  • When they decide they need to improve, they tend to focus on a “magic bullet” to fix their problems – usually automation.
  • They want to show something impressive to their peers, and large-scale automation fits that purpose.
  • They are very reluctant to spend money on improving people. They do not believe that good people are a resource they can count on. Yet Lean Manufacturing without training of the operators and supervisors does not really work... and the greatest concern is the sustenance of the gains after the initial lean-ing of operations.
  • Chinese people in general don't like to pay for consulting services. They are used to making money by buying and selling products. The culture of professional services is still emerging in mainland China. American and European companies, in contrast, place a value on intangible assets such as branding or technical innovation.

Manufacturing managers are generally more inclined to pay for a technical expertise in molding, extrusion, tool making, automation, design, etc. They expect an expert to come in, implement changes quickly, and show tangible results. After that phase, the expert should leave—they then count on the remaining staff to ensure the changes stick.

In our experience, this approach seldom works for two reasons:

  1. The technical expert often lacks the soft skills that are necessary to persuade people to apply his program. Some operators, technicians, and managers can resist and make the whole plan fail miserably.
  2. As David Collins points out, unless the management system supports positive changes in an organization, those hard skills factory managers are looking for do not bring benefits. Chinese companies generally make no effort at maintaining progress through internal audits, incentives, visual boards, etc. It means the changes seldom stick, as people tend to revert to what they were doing previously.

The Lean Movement In China

More and more factories have heard of the way Lean can help cut their costs, and they want those savings. Lean manufacturing consulting firms are trying to capitalize on this. However, they need to put in place the foundation for continuous improvement before starting to apply Lean tools.

More than 95% of Chinese factories employing less than 600 workers lack four critical skills:

  1. HR management (involving managers and operators to work toward performance indicators, and retaining talent without resort to monetary incentives)
  2. Equipment maintenance (keeping machinery up, available for production, and making good pieces)
  3. Industrial/process engineering (planning and setting workstations and assembly lines to increase the number of pieces made per labor hour)
  4. Quality engineering (reducing defects and scrap through a problem-solving approach)

Not surprisingly, American- or European-owned factories that are based in China have taken the lead in applying Lean. They tend to have much better management systems, which make a Lean turnaround success much easier to pull off. More and more Chinese manufacturers are trying to catch up, though. They use consultants and/or they hire a high-level manager, then they keep at it for a few years—the time needed to ensure the whole organization has embraced the new way of doing business.

This has been the case since the 1990s in the automotive sector (which includes not only metal suppliers but also plastic, rubber, textile, leather, electronics, and many other types of factories) but it has only really gained momentum over the past few years. The new generation of manufacturing managers is taking control with a more open-minded approach and a readiness for change.

Manufacturers in the West should pay attention to this important trend.


22 signs of good factory management presentation download

Topics: Lean Manufacturing, Management/Turnaround, Manufacturing Consulting

Renaud Anjoran

Renaud Anjoran

15 years experience in China.
Partner, China Manufacturing Consultants.
Worked with hundreds of factories in China.
Certifications: ASQ CQE & CRE; ISO 9001 & 14001 lead auditor.
Author of well-read blog, Quality Inspection Tips.

Subscribe to receive MTG tips & resources

Related articles

Understanding and Managing Capacity Constraints

Renaud Anjoran

Read More

Navigating Protective Tariffs: What Manufacturers Need to Know

Renaud Anjoran

Read More

AI in Manufacturing: Are Manufacturing Consultants Still Needed?

Renaud Anjoran

Read More